Municipal Steel Structures

Have a need for a large steel structure as part of a public works project?

We've partnered with a large steel structure manufacturer so we can meet all your Park and Rec needs.

Clock tower

We have people in place who can bring your project all the way.

Custom Pavilion

Send us your "back of the envelope" sketch.

We will fill in the blanks.

A steel pavilion that resembles two arms

Custom Shade Shelter

We call this the Arms Pavilion.

Custom Steeltown Shade Shelter

A glorious eight sided custom, steel, shade pavilion

Huge pavilion that looks like half a barrel

Tapered Barrel Pavilion

This pavilion looks like half a barrel

Baldwin Pergoals did not build these structures, this section explains that we have the capability to design custom pavilion-like structures and to oversee the manufacture and installation of complex steel projects.

The rigidity of the pergola is derived from the stability of the connection to the Earth. The importance of big, solid footings which are placed accurately, cannot be overstated.

The rigidity of the pergola is derived from the stability of the connection to the Earth.
Concrete footings: 14" Diameter minimum for 10" square and 12" round columns.
Our site plan will show a diagonal dimension. This helps you square the footings to each other.
Concrete pad: Should be poured 12" deep in the area where the columns will stand.
Stone wall: It's best to drill 18" deep into the well built, mortared stone wall.
Concrete pier: Wet set our 5/8" stainless steel rods into the footing then build the pier
Tolerance factor: Footings should be placed accurately with an overall error margin of less than an inch.
Conduit in footings: Bring a sweep into your footing with the center about three inches off center.
Deck mounted: Ask us for PDF drawings of best practice connection methods.

It is the customers responsibility to make sure that an adequate mounting surface is in place. The customer is responsible for supplying relevant dimensions such as the depth and width of column centers and overall height requirements for the structure.

All dimensions, including overhangs and member spacing are completely customizable during the design process. At the time of installation, nothing can be changed.

Standing a column up onto a concrete footing. We previously drilled the footing and epoxied a 5/8" stainless steel threaded rod into the footing.

Gather Your Measurements

Measurements are taken from column centers, our typical overhang is 24 inches
A freestanding pergola that measures 120" x 120" on center will have an overall size of 168" x 168"
An attached pergola that measures 120" x 120" on center will have an overall size of 144" deep x 168" wide
All dimensions, including overhangs and member spacing are completely customizable

Use our Pricing Tool

Our pricing tool let's you design your pergola in real time and get an actual price
You will see a plan view CAD drawing of your pergola
You can consider our electrical options, a shade system and/or our installation service
follow this link to our Pricing Tool
You will have the ability to save your project into our database then share the link with your team for group collaboration

Your photos help us while desiging the best pergola

Send Us Photos

Your photos help us serve you better in the design phase
Please send us pictures of your proposed site and the exterior of your home
Pictures can be sent via email to sales@baldwinpergolas.com
...or via text to (860) 500-1741. Our pricing tool also allows one to upload photos and various file types

a picture of Mike setting up at an architecture show

Speak With Our Team

Once you have sent us your measurements and pictures we will reach out to you
Our project manager, Michael Hurlburt, will work out all of the important details
Once we have an understanding of your vision we will produce a set of drawings and a proposal
If you accept our proposal we require a 50% deposit to begin production

an electrician wiring lights into a pergola

Consider the Options

We offer a wide variety of options for you to consider
Decorative Details: We offer an array of column styles and rafter contours
Finishes: Custom colors are available, including color matched finishes
Electrical: We can factory prewire your structure to accommodate lighting, fans, heaters, and more

Confirm The Details

Review and confirm your pergola or pavilion drawings
Review your electrical and shade system options
Sign and return the proposal
Once a signed proposal is returned and a deposit is received, we will begin production

Testimonials

Hi Guys! The pergola went up yesterday � I�m speechless!!! It�s so beautiful. I want to thank you for the time and effort you put into the design and execution of the project. I will send photos. The company was pleasure to work with from beginning to end. You have it right � don�t change a thing!

Fran Rosato

The guys just left and the pergola looks great! Thanks so much! ... The guys were great and everything looks super!

Troy Gordon

Your pergola went together with ease. We were impressed with the precision and craftsmenship of each piece of the pergola. There was minimal work to align the pieces into there proper position. I wanted to also put a plug in for an opportunity to be an installer of baldwin pergolas and other structures if you needed a crew to install in my location (PA). Thanks again!

Dennis Hosler, Hosler's Homescapes

There is still landscaping to do but I thought you would like to see the completed pergola on location. The quality and packing were quite excellent and I've received rave reviews about the pergola from neighbors.

Minh Vu

Want you and your staff to know how pleased we are with the entire process and product delivered. Your techs were not only professional but very concerned with every detail of delivering a perfect product. We will consider other products in the near future. You should take great pride in the product and staff your developed. Thanks again!

John Gribok

The finished pergola is stunning. We've already received many complements.

John Mitchell

I was worried that the joints would swell and be difficult to assemble in the rain. I had very little difficulty. They went together very well. The workmanship on the parts was excellent.

John Mitchell

I just wanted to let you know that the pergola and railings are installed. Everything came out fabulous. My customers are very happy with what they have now. Thank you very much!

Jonathon Sweet

Max, I like those screws you use, haven't seen them in Home Depot. I will upload a picture of the pergola with me resting underneath. It went together really well and things just dropped in - I kept expecting something to go wrong, but it fit together well from start to finish. Thanks for a quality product!

Edwin Hyde

Hello Max and Matt, I ordered a pergola from you in 2013 and have been just delighted with it. Looks great and is very easy to maintain with an annual pressure wash. See the enclosed pic of the pergola in the 'Low Garden.'

Ralph DeFalco

"First, man defines his architecture. Forever after, his architecture defines him."

Municipal Steel Structures

Have a need for a large steel structure as part of a public works project?

We've partnered with a large steel structure manufacturer so we can meet all your Park and Rec needs.

Clock tower

Custom Pavilion

Custom Shade Shelter

Custom Steeltown Shade Shelter

Tapered Barrel Pavilion

Send us your plans »

The rigidity of the pergola is derived from the stability of the connection to the Earth. The importance of big, solid footings which are placed accurately, cannot be overstated.

The rigidity of the pergola is derived from the stability of the connection to the Earth.

Concrete footings: 14" Diameter minimum for 10" square and 12" round columns.

Our site plan will show a diagonal dimension. This helps you square the footings to each other.

Concrete pad: Should be poured 12" deep in the area where the columns will stand.

Stone wall: It's best to drill 18" deep into the well built, mortared stone wall.

Concrete pier: Wet set our 5/8" stainless steel rods into the footing then build the pier

Tolerance factor: Footings should be placed accurately with an overall error margin of less than an inch.

Conduit in footings: Bring a sweep into your footing with the center about three inches off center.

Deck mounted: Ask us for PDF drawings of best practice connection methods.

It is the customers responsibility to make sure that an adequate mounting surface is in place. The customer is responsible for supplying relevant dimensions such as the depth and width of column centers and overall height requirements for the structure.

All dimensions, including overhangs and member spacing are completely customizable during the design process. At the time of installation, nothing can be changed.

Standing a column up onto a concrete footing. We previously drilled the footing and epoxied a 5/8" stainless steel threaded rod into the footing.

Gather Your Measurements

Measurements are taken from column centers, our typical overhang is 24 inches

A freestanding pergola that measures 120" x 120" on center will have an overall size of 168" x 168"

An attached pergola that measures 120" x 120" on center will have an overall size of 144" deep x 168" wide

All dimensions, including overhangs and member spacing are completely customizable

Use our Pricing Tool

Our pricing tool let's you design your pergola in real time and get an actual price

You will see a plan view CAD drawing of your pergola

You can consider our electrical options, a shade system and/or our installation service

follow this link to our Pricing Tool

You will have the ability to save your project into our database then share the link with your team for group collaboration

Send Us Photos

Your photos help us serve you better in the design phase

Please send us pictures of your proposed site and the exterior of your home

Pictures can be sent via email to sales@baldwinpergolas.com

...or via text to (860) 500-1741. Our pricing tool also allows one to upload photos and various file types

Speak With Our Team

Once you have sent us your measurements and pictures we will reach out to you

Our project manager, Michael Hurlburt, will work out all of the important details

Once we have an understanding of your vision we will produce a set of drawings and a proposal

If you accept our proposal we require a 50% deposit to begin production

Consider the Options

We offer a wide variety of options for you to consider

Decorative Details: We offer an array of column styles and rafter contours

Finishes: Custom colors are available, including color matched finishes

Electrical: We can factory prewire your structure to accommodate lighting, fans, heaters, and more

Confirm The Details

Review and confirm your pergola or pavilion drawings

Review your electrical and shade system options

Sign and return the proposal

Once a signed proposal is returned and a deposit is received, we will begin production

Testimonials

It's been a tremendous honor to design and build these fantastic structures for our customers. We look forward to upcoming challenges and the beauty they bless us with.

Navigation

Contact Us